[1]李东传,金冶,唐顺杰.超高新超高压条件下聚能射孔试验装置研制与应用[J].测井技术,2019,43(05):554-557.[doi:10.16489/j.issn.1004-1338.2019.05.021]
 LI Dongchuan,JIN Ye,TANG Shunjie.Research and Applications of Jet Perforating Experimental Equipment at Ultrahigh Temperature and Pressure[J].WELL LOGGING TECHNOLOGY,2019,43(05):554-557.[doi:10.16489/j.issn.1004-1338.2019.05.021]
点击复制

超高新超高压条件下聚能射孔试验装置研制与应用()
分享到:

《测井技术》[ISSN:1004-1338/CN:61-1223/TE]

卷:
第43卷
期数:
2019年05期
页码:
554-557
栏目:
射孔技术
出版日期:
2019-10-20

文章信息/Info

Title:
Research and Applications of Jet Perforating Experimental Equipment at Ultrahigh Temperature and Pressure
文章编号:
1004-1338(2019)05-0554-05
作者:
李东传1金冶1唐顺杰2
(1.石油工业油气田射孔器材质量监督检验中心,黑龙江大庆163853; 2.武汉海王机电工程技术公司,湖北武汉430064)
Author(s):
LI Dongchuan1JIN Ye1TANG Shunjie2
(1. Perforators Inspection Center of PetroChina, Daqing, Heilongjiang 163853, China; 2. Wuhan Haiwang Machinery & Electronic Engineering Technology CO. LTD., Wuhan, Hubei 430064, China)
关键词:
石油射孔超高温超高压试验装置聚能射孔器检验评价
Keywords:
petroleum perforation ultrahigh temperature and pressure experimental equipment jet perforating equipment test evaluation
分类号:
P631.84; TE257
DOI:
10.16489/j.issn.1004-1338.2019.05.021
摘要:
为满足油田用户掌握超高温超高压条件下聚能射孔器性能的需求,推动射孔技术的发展,研发了超高温超高压条件下聚能射孔试验装置。该装置能够模拟井下温度、压力(围压、井压和孔隙压力)及储层靶进行射孔试验和流动测试,可以检测穿孔深度、穿孔孔径、流量等数据;额定工作温度300℃、额定工作压力210 MPa、单次连续工作时间超过180 h。完成了210℃、48 h、181 MPa条件下50 g(PYX)装药的聚能射孔弹射孔等试验,装置安全性好、操作性强,能够满足现场生产需要。为耐高温耐高压聚能射孔器的检验、评价和应用提供了条件。
Abstract:
A jet perforating experimental equipment (UHT and UHP) is developed for ultrahigh temperature and pressure conditions. The equipment can help oilfield users understand the performance of shaped charge perforators at UHT and UHP, and promote the development of perforating technology. The equipment can simulate downhole temperature and pressure (confining pressure, well pressure and pore pressure) and reservoir target for perforation test and flow test, and can detect perforation depth, diameter, flow and other data. It can work for more than 180 h at rated working temperature 300℃ and rated working pressure 210 MPa in a run. Tests on 50 g PXY shaped charge have been completed at 210℃ and 181 MPa and for 48 h. And the results proved the equipment safe and operable, and can meet the needs of field production. It provides the conditions for test, evaluation and application of high-temperature and high-pressure shaped charge perforators.

参考文献/References:


[1]何亿成, 王界益, 周绪国, 等. 一种射孔器检测方法及用于该方法的装置: 1392327A [P]. 2003-01-22.
[2]彭原平, 肖胜飚. 高温高压对射孔弹性能的影响 [J]. 测井与射孔, 2006, 19(1): 61-65.
[3]董经利, 朱留方, 等. 模拟储层条件下射孔效能检测装置: CN 1900481 B [P]. 2010-08-18.
[4]董经利, 陈序三, 邵在平, 等. 高温高压条件下射孔效能试验研究 [J]. 测井技术, 2008, 32(2): 100-104, 127.
[5]董经利, 张波, 等. 高温高压条件下射孔效能检测与评价初探 [C]∥2013年油气井射孔技术交流论文集, 昆明, 2013: 1-9.
[6]唐凯, 陈锋, 等. 高温高压实验室用射孔模拟靶装置: CN 101598014 A [P]. 2009-12-09.
[7]李云, 吴焕龙, 付代轩, 等. 超高温射孔弹高温高压条件下穿深性能的试验研究 [J]. 测井技术, 2017, 41(1): 123-126.
[8]罗友高, 刘刚, 唐顺杰, 等. 高温超高压条件下的三腔压力分隔装置设计 [J]. 石油矿场机械, 2011, 40(5): 37-40.
[9]GB/T 34019—2017超高压容器 [S]. 北京: 中国标准出版社, 2017.
[10]ASME code case 2564—2014 [S]. American Society of Mechanical Engineers, 2014.
[11]GB/T 20488—2006油气井聚能射孔器材性能试验方法 [S]. 北京: 中国标准出版社, 2006.

相似文献/References:

[1]刁林涛,高峰,汤继超.水平井及大斜度老井再射孔的校深方法[J].测井技术,2012,36(05):526.
 DIAO Lintao,GAO Feng,TANG Jichao.Depth Correction Method for Reperforation in Horizontal and High Inclination Old Well[J].WELL LOGGING TECHNOLOGY,2012,36(05):526.
[2]张虎,马生祖,魏锋,等.泵送桥塞坐封用复合火药研究[J].测井技术,2012,36(05):533.
 ZHANG Hu,MA Shengzu,WEI Feng,et al.Study on Composite Powder Used in Setting Pumping Bridge Plug[J].WELL LOGGING TECHNOLOGY,2012,36(05):533.
[3]李万全,李必红,赵云涛,等.混凝土靶强度与射孔弹穿孔深度关系的初步研究[J].测井技术,2012,36(03):324.
 LI Wanquan,LI Bihong,ZHAO Yuntao,et al.On Linear Regression Analysis of the Penetrating Depth and Target’s Compressive Strength[J].WELL LOGGING TECHNOLOGY,2012,36(05):324.
[4]赵海文,张志强.隔离式负压射孔技术研究及应用[J].测井技术,2005,29(S1):68.
 ZHAO Hai-wen,ZHANG Zhi-qiang.On Isolated Under-balanced Perforating Technology and Its Application[J].WELL LOGGING TECHNOLOGY,2005,29(05):68.
[5]官超积.石油射孔精细排炮及软件[J].测井技术,2005,29(05):29.
 GUAN Chao-ji.Subtle Cannon Arrangement Software for Petroleum Perforation[J].WELL LOGGING TECHNOLOGY,2005,29(05):29.
[6]梁纯,孙新波,王海东,等.油气井用导爆索收缩性测试技术[J].测井技术,2007,31(01):80.
 LIANG Chun,SUN Xin-bo,WANG Hai-dong.A Contractibility Test Bench for Perforation Detonating Cord[J].WELL LOGGING TECHNOLOGY,2007,31(05):80.
[7]周堃,赵开良,张锋,等.多级脉冲增效射孔技术研究[J].测井技术,2007,31(01):82.
 ZHOU Zhao,ZHAO Kai-liang,ZHANG Feng,et al.Research of The Multilevel Impulse Increase-benefit Perforating Technology[J].WELL LOGGING TECHNOLOGY,2007,31(05):82.
[8]徐勇,秦建军.射孔新技术在川西地区的应用[J].测井技术,2007,31(01):85.
 XU Yong,QIN Jian-jun.Application of New Perforation Technology in West Sichuan Basin[J].WELL LOGGING TECHNOLOGY,2007,31(05):85.
[9]陈锋,程启文.事故树分析方法在油气井射孔作业中的应用[J].测井技术,2007,31(01):91.
 CHEN Feng,CHENG Qi-wen.Fault Tree Analysis in Perforation Job of Oil and Gas Well[J].WELL LOGGING TECHNOLOGY,2007,31(05):91.
[10]王树申,郑长建,赵春辉,等.无围压射孔技术研究[J].测井技术,2006,30(01):50.
 WANG Shu-shen~,ZHENG Chang-jian~,ZHAO Chun-hui~,et al.Investigation of Confining Pressure-free Perforating Technique[J].WELL LOGGING TECHNOLOGY,2006,30(05):50.

备注/Memo

备注/Memo:
第一作者:李东传,男,1969年生,高级工程师,研究方向为油气井用射孔器材检测技术。E-mail:dqlidongchuan@petrochina.com.cn(修改回稿日期: 2019-05-10本文编辑余迎)
更新日期/Last Update: 2019-10-20