[1]李万全,李必红,赵云涛,等.混凝土靶强度与射孔弹穿孔深度关系的初步研究[J].测井技术,2012,36(03):324-328.
 LI Wanquan,LI Bihong,ZHAO Yuntao,et al.On Linear Regression Analysis of the Penetrating Depth and Target’s Compressive Strength[J].WELL LOGGING TECHNOLOGY,2012,36(03):324-328.
点击复制

混凝土靶强度与射孔弹穿孔深度关系的初步研究()
分享到:

《测井技术》[ISSN:1004-1338/CN:61-1223/TE]

卷:
第36卷
期数:
2012年03期
页码:
324-328
栏目:
射孔技术
出版日期:
2012-06-29

文章信息/Info

Title:
On Linear Regression Analysis of the Penetrating Depth and Target’s Compressive Strength
作者:
李万全李必红赵云涛徐文新张建峰周明
西安物华巨能爆破器材有限责任公司, 陕西 西安 710061
Author(s):
LI WanquanLI BihongZHAO YuntaoXU WenxinZHANG JianfengZHOU Ming
Xi’an Wuhua Juneng Blasting Equipment CO. LTD., Xi’ an, Shaanxi 710061, China
关键词:
石油射孔 混凝土靶 抗压强度 射孔弹 穿孔深度 回归分析
Keywords:
petroleum perforation concrete target compression strength perforating charge perforating depth regression analysis
分类号:
TE257.1
文献标志码:
A
摘要:
通过102型深穿透射孔弹射流侵彻不同强度柱状混凝土靶试验,结合线 性回归分析方法研究了射孔弹对柱状混凝土靶穿孔深度与靶体强度之间的关系,拟合得出二者之间的经验公式,经试验验证该公式预测误差 在5%之内,为聚能射孔弹的设计提供理论指导,同时也为射孔弹的研制从试验验证型向计算研究型改进提供了基础数据和研究方法。
Abstract:
Experiment is tried on penetrating columnar concrete target of different strengths with 102 deep penetration perforating charges. The linear regression analysis method is used to study the relation between the penetrating depth of the chargrs and target’s compression strength, from which the formula between the two is derived. The experiment shows that the error between the formula and the experiment result is less than 5%. The result provides theoretical instruction for the design of perforating charge. And it could also provide basic data and study methods for the development of perforating charge in the process of experimental confirmation to computation research.

参考文献/References:

[1]Brooks J E,Behrmann L A. Effect of SandGrain Size on Perforator Performance [C]∥SPE 39457,1998.
[2]Bell W T,Golian T G,Reese J W,et al. Measuring Shaped Charge Gun Performance: An Alternate API Section 1 Target[C ]∥SPE 67955,2000.
[3]刘向京,潘永新,卢冬红,等.射孔检测靶强度的影响因素及评测方法研究[J].测井技术, 2008,32(2): 118122.
[4]孙新波,梁纯,王宝兴,等. 影响射孔侵彻深度的混凝土靶材物性因素分析[J].爆破器材,2006,35(5):3133.
[5]李东传,姜延东,金成福,等.混凝土靶养护时间与抗压强度和聚能射孔器穿孔深度的关系初探[J].测井技术,2008,32(5):476 478.
[6]GB/T 204882006油气井聚能射孔器材性能试验方法[S].北京:中国标准出版社,2006.
[7]王桂松,史建红,尹素菊,等.线性模型引论[M].北京:科学出版社,2004.
[8]梅长林,范金城.数据分析方法[M].北京:高等教育出版社,2006.

相似文献/References:

[1]刁林涛,高峰,汤继超.水平井及大斜度老井再射孔的校深方法[J].测井技术,2012,36(05):526.
 DIAO Lintao,GAO Feng,TANG Jichao.Depth Correction Method for Reperforation in Horizontal and High Inclination Old Well[J].WELL LOGGING TECHNOLOGY,2012,36(03):526.
[2]张虎,马生祖,魏锋,等.泵送桥塞坐封用复合火药研究[J].测井技术,2012,36(05):533.
 ZHANG Hu,MA Shengzu,WEI Feng,et al.Study on Composite Powder Used in Setting Pumping Bridge Plug[J].WELL LOGGING TECHNOLOGY,2012,36(03):533.
[3]赵海文,张志强.隔离式负压射孔技术研究及应用[J].测井技术,2005,29(S1):68.
 ZHAO Hai-wen,ZHANG Zhi-qiang.On Isolated Under-balanced Perforating Technology and Its Application[J].WELL LOGGING TECHNOLOGY,2005,29(03):68.
[4]官超积.石油射孔精细排炮及软件[J].测井技术,2005,29(05):29.
 GUAN Chao-ji.Subtle Cannon Arrangement Software for Petroleum Perforation[J].WELL LOGGING TECHNOLOGY,2005,29(03):29.
[5]梁纯,孙新波,王海东,等.油气井用导爆索收缩性测试技术[J].测井技术,2007,31(01):80.
 LIANG Chun,SUN Xin-bo,WANG Hai-dong.A Contractibility Test Bench for Perforation Detonating Cord[J].WELL LOGGING TECHNOLOGY,2007,31(03):80.
[6]周堃,赵开良,张锋,等.多级脉冲增效射孔技术研究[J].测井技术,2007,31(01):82.
 ZHOU Zhao,ZHAO Kai-liang,ZHANG Feng,et al.Research of The Multilevel Impulse Increase-benefit Perforating Technology[J].WELL LOGGING TECHNOLOGY,2007,31(03):82.
[7]徐勇,秦建军.射孔新技术在川西地区的应用[J].测井技术,2007,31(01):85.
 XU Yong,QIN Jian-jun.Application of New Perforation Technology in West Sichuan Basin[J].WELL LOGGING TECHNOLOGY,2007,31(03):85.
[8]陈锋,程启文.事故树分析方法在油气井射孔作业中的应用[J].测井技术,2007,31(01):91.
 CHEN Feng,CHENG Qi-wen.Fault Tree Analysis in Perforation Job of Oil and Gas Well[J].WELL LOGGING TECHNOLOGY,2007,31(03):91.
[9]王树申,郑长建,赵春辉,等.无围压射孔技术研究[J].测井技术,2006,30(01):50.
 WANG Shu-shen~,ZHENG Chang-jian~,ZHAO Chun-hui~,et al.Investigation of Confining Pressure-free Perforating Technique[J].WELL LOGGING TECHNOLOGY,2006,30(03):50.
[10]刘桥,蔡山.充轻质气增效射孔器研制[J].测井技术,2007,31(03):300.
 LIU Qiao,CAI Shan.Experiments of Perforator Pressure-enhanced with Light Gas[J].WELL LOGGING TECHNOLOGY,2007,31(03):300.
[11]李东传,张伟民,张建峰.射角对定射角射孔器穿深性能影响试验研究[J].测井技术,2018,42(05):597.[doi:10.16489/j.issn.1004-1338.2018.05.020]
 LI Dongchuan,ZHANG Weimin,ZHANG Jianfeng.Experimental Research of the Effect of Departure Angles on Penetration Properties of Fixed Angles Perforators[J].WELL LOGGING TECHNOLOGY,2018,42(03):597.[doi:10.16489/j.issn.1004-1338.2018.05.020]

备注/Memo

备注/Memo:
作者简介: 李万全,男,1982年生,硕士,从事石油射孔技术及器材研究。
更新日期/Last Update: 2012-06-20