[1]梁纯,孙新波,王海东,等.油气井用导爆索收缩性测试技术[J].测井技术,2007,31(01):80-81.
 LIANG Chun,SUN Xin-bo,WANG Hai-dong.A Contractibility Test Bench for Perforation Detonating Cord[J].WELL LOGGING TECHNOLOGY,2007,31(01):80-81.
点击复制

油气井用导爆索收缩性测试技术()
分享到:

《测井技术》[ISSN:1004-1338/CN:61-1223/TE]

卷:
第31卷
期数:
2007年01期
页码:
80-81
栏目:
射孔技术专栏
出版日期:
2007-02-22

文章信息/Info

Title:
A Contractibility Test Bench for Perforation Detonating Cord
作者:
梁纯;孙新波;王海东;
石油工业射孔器材检测中心;石油工业射孔器材检测中心 黑龙江大庆163853;黑龙江大庆163853;
Author(s):
LIANG ChunSUN Xin-boWANG Hai-dong
Petroleum Industry Perforator Inspection Center,PetroChina,Daqing,Heilongjiang 163853,China
关键词:
石油射孔导爆索收缩性测试防爆测试台架
分类号:
TE257
摘要:
为在高温环境中安全准确地测量导爆索长度的微量变化,研制了安全防爆的导爆索收缩性测试台架。此台架由导爆索安装装置、温度控制系统、防爆壳体、位移测量系统、无震动工作台面以及数据采集与处理系统组成。其加温过程采用6点PID自动温度控制;其长度测量采用互感式位移传感器,位移分辨率为0.1μm或0.2μm。该台架能满足产品标准对测试的要求。

相似文献/References:

[1]刁林涛,高峰,汤继超.水平井及大斜度老井再射孔的校深方法[J].测井技术,2012,36(05):526.
 DIAO Lintao,GAO Feng,TANG Jichao.Depth Correction Method for Reperforation in Horizontal and High Inclination Old Well[J].WELL LOGGING TECHNOLOGY,2012,36(01):526.
[2]张虎,马生祖,魏锋,等.泵送桥塞坐封用复合火药研究[J].测井技术,2012,36(05):533.
 ZHANG Hu,MA Shengzu,WEI Feng,et al.Study on Composite Powder Used in Setting Pumping Bridge Plug[J].WELL LOGGING TECHNOLOGY,2012,36(01):533.
[3]李万全,李必红,赵云涛,等.混凝土靶强度与射孔弹穿孔深度关系的初步研究[J].测井技术,2012,36(03):324.
 LI Wanquan,LI Bihong,ZHAO Yuntao,et al.On Linear Regression Analysis of the Penetrating Depth and Target’s Compressive Strength[J].WELL LOGGING TECHNOLOGY,2012,36(01):324.
[4]赵海文,张志强.隔离式负压射孔技术研究及应用[J].测井技术,2005,29(S1):68.
 ZHAO Hai-wen,ZHANG Zhi-qiang.On Isolated Under-balanced Perforating Technology and Its Application[J].WELL LOGGING TECHNOLOGY,2005,29(01):68.
[5]官超积.石油射孔精细排炮及软件[J].测井技术,2005,29(05):29.
 GUAN Chao-ji.Subtle Cannon Arrangement Software for Petroleum Perforation[J].WELL LOGGING TECHNOLOGY,2005,29(01):29.
[6]周堃,赵开良,张锋,等.多级脉冲增效射孔技术研究[J].测井技术,2007,31(01):82.
 ZHOU Zhao,ZHAO Kai-liang,ZHANG Feng,et al.Research of The Multilevel Impulse Increase-benefit Perforating Technology[J].WELL LOGGING TECHNOLOGY,2007,31(01):82.
[7]徐勇,秦建军.射孔新技术在川西地区的应用[J].测井技术,2007,31(01):85.
 XU Yong,QIN Jian-jun.Application of New Perforation Technology in West Sichuan Basin[J].WELL LOGGING TECHNOLOGY,2007,31(01):85.
[8]陈锋,程启文.事故树分析方法在油气井射孔作业中的应用[J].测井技术,2007,31(01):91.
 CHEN Feng,CHENG Qi-wen.Fault Tree Analysis in Perforation Job of Oil and Gas Well[J].WELL LOGGING TECHNOLOGY,2007,31(01):91.
[9]王树申,郑长建,赵春辉,等.无围压射孔技术研究[J].测井技术,2006,30(01):50.
 WANG Shu-shen~,ZHENG Chang-jian~,ZHAO Chun-hui~,et al.Investigation of Confining Pressure-free Perforating Technique[J].WELL LOGGING TECHNOLOGY,2006,30(01):50.
[10]刘桥,蔡山.充轻质气增效射孔器研制[J].测井技术,2007,31(03):300.
 LIU Qiao,CAI Shan.Experiments of Perforator Pressure-enhanced with Light Gas[J].WELL LOGGING TECHNOLOGY,2007,31(01):300.

更新日期/Last Update: 2013-02-22