[1]张昭,胡海飞,亢战,等.基于Taguchi方法的射孔枪多目标优化设计[J].测井技术,2009,33(02):181-188.
 ZHANG Zhao,HU Hai-fei,KANG Zhan.Taguchi Method Based on Multi-objective Optimization of Perforating Gun[J].WELL LOGGING TECHNOLOGY,2009,33(02):181-188.
点击复制

基于Taguchi方法的射孔枪多目标优化设计()
分享到:

《测井技术》[ISSN:1004-1338/CN:61-1223/TE]

卷:
第33卷
期数:
2009年02期
页码:
181-188
栏目:
射孔技术
出版日期:
2009-04-30

文章信息/Info

Title:
Taguchi Method Based on Multi-objective Optimization of Perforating Gun
作者:
张昭;胡海飞;亢战;
大连理工大学运载工程与力学部工业装备结构分析国家重点实验室;
Author(s):
ZHANG ZhaoHU Hai-feiKANG Zhan
State Key Laboratory of Structural Analysis for Industrial Equipment,Faculty of Vehicle Engineering and Mechanics,Dalian University of Technology,Dalian,Liaoning 116024,China
关键词:
石油射孔射孔枪设计有限元法Taguchi方法多目标优化区间取值综合评分法
分类号:
TE925
摘要:
基于Taguchi方法,以射孔枪管形状参数中的管半径、射孔枪孔眼半径和开孔数为3水平试验因素,设计出一个3因素3水平正交表,通过有限元数值试验,计算了结构的极限载荷和位移。通过对结果进行极差和方差分析,确定了形状参数对结构性能的影响水平,综合考虑极限载荷和最大径向位移,采用区间取值(RTV)综合评分法进行了多目标结构参数优化。分析发现管径增大导致极限载荷增加,孔径和孔数增大导致极限载荷减小;管径、孔径和孔数增大都导致径向位移增大;在各种参数中,孔径的影响最为明显。

相似文献/References:

[1]刁林涛,高峰,汤继超.水平井及大斜度老井再射孔的校深方法[J].测井技术,2012,36(05):526.
 DIAO Lintao,GAO Feng,TANG Jichao.Depth Correction Method for Reperforation in Horizontal and High Inclination Old Well[J].WELL LOGGING TECHNOLOGY,2012,36(02):526.
[2]张虎,马生祖,魏锋,等.泵送桥塞坐封用复合火药研究[J].测井技术,2012,36(05):533.
 ZHANG Hu,MA Shengzu,WEI Feng,et al.Study on Composite Powder Used in Setting Pumping Bridge Plug[J].WELL LOGGING TECHNOLOGY,2012,36(02):533.
[3]李万全,李必红,赵云涛,等.混凝土靶强度与射孔弹穿孔深度关系的初步研究[J].测井技术,2012,36(03):324.
 LI Wanquan,LI Bihong,ZHAO Yuntao,et al.On Linear Regression Analysis of the Penetrating Depth and Target’s Compressive Strength[J].WELL LOGGING TECHNOLOGY,2012,36(02):324.
[4]陶亮,周志华.数值模拟技术在射孔枪设计中的应用[J].测井技术,2005,29(S1):33.
 TAO Liang,ZHOU Zhi-hua.Applications of Numerical Simulation in Perforator Design[J].WELL LOGGING TECHNOLOGY,2005,29(02):33.
[5]赵海文,张志强.隔离式负压射孔技术研究及应用[J].测井技术,2005,29(S1):68.
 ZHAO Hai-wen,ZHANG Zhi-qiang.On Isolated Under-balanced Perforating Technology and Its Application[J].WELL LOGGING TECHNOLOGY,2005,29(02):68.
[6]官超积.石油射孔精细排炮及软件[J].测井技术,2005,29(05):29.
 GUAN Chao-ji.Subtle Cannon Arrangement Software for Petroleum Perforation[J].WELL LOGGING TECHNOLOGY,2005,29(02):29.
[7]梁纯,孙新波,王海东,等.油气井用导爆索收缩性测试技术[J].测井技术,2007,31(01):80.
 LIANG Chun,SUN Xin-bo,WANG Hai-dong.A Contractibility Test Bench for Perforation Detonating Cord[J].WELL LOGGING TECHNOLOGY,2007,31(02):80.
[8]周堃,赵开良,张锋,等.多级脉冲增效射孔技术研究[J].测井技术,2007,31(01):82.
 ZHOU Zhao,ZHAO Kai-liang,ZHANG Feng,et al.Research of The Multilevel Impulse Increase-benefit Perforating Technology[J].WELL LOGGING TECHNOLOGY,2007,31(02):82.
[9]徐勇,秦建军.射孔新技术在川西地区的应用[J].测井技术,2007,31(01):85.
 XU Yong,QIN Jian-jun.Application of New Perforation Technology in West Sichuan Basin[J].WELL LOGGING TECHNOLOGY,2007,31(02):85.
[10]陈锋,程启文.事故树分析方法在油气井射孔作业中的应用[J].测井技术,2007,31(01):91.
 CHEN Feng,CHENG Qi-wen.Fault Tree Analysis in Perforation Job of Oil and Gas Well[J].WELL LOGGING TECHNOLOGY,2007,31(02):91.

更新日期/Last Update: 2009-04-30